index.gif (1853 bytes)  ShipCharges.gif (2148 bytes) online3.gif (4005 bytes)
           
                                 
 


 

  


Giant Online Catalog with over 3000 fiberglass parts

  
     
     
     
     
     
                 
                                 

 

          
 
                                               

 
Pinto"Cowl" hood
1971-1978 3-1/2"

    
     
     
             

AMX - LUV TRUCK - PINTO

      
 


LV101 wirh PR100

         
   

Scroll down or click on part number for pictures and further information!

  
   

 

    

 (877) 735-7772

       
     

Toll Free Order Line (877) 735-7772
(7:00 to 4:30 Pacific Time) Mon-Fri

    
         
   

To place an order call (877) 735-7772 or jot down the part number,
description and price, then go to On Line Ordering

  
 
 		                      

LV231 LUV Truck Hood with 7" x 31" Wide Cowl $749

  
                                         
Part
No.		 Click On Photo for Detail 1968 AMX and 1969 AMX Hoods Notes Racer
Net ($)		 Wt
(Lb)* 		 
 

 

Hoods

 AM-101   1968-69 AMX stock flat hood (fits Javelin), pin front H. 420.00 22
AM-183   1968-69 AMX 3-1/2" Cowl induction hood (fits Javelin), pin front H 570.00 23
AM-185   1968-69 AMX 4-3/4" Cowl induction hood (fits Javelin), pin front H 599.00 23
AM-186   1968-69 AMX 6" Cowl induction hood (fits Javelin), pin front H 640.00 24
AM-187   1968-69 AMX 7" Cowl induction hood (fits Javelin), pin front H 640.00 24
AM-189   1968-69 AMX 9" Cowl induction hood (fits Javelin), pin front H 699.00 25

Race - Full Pin on Hoods 1968 - 1969 AMX Hoods
 

 

Hoods

 AM-101T   1968-69 AMX Race Wt. Hood (fits Javelin), Full pin on P 399.00 16
AM-183T   1968-69 AMX 3-1/2" Cowl induction hood (fits Javelin), Full pin on P 499.00 17
AM-185T   1968-69 AMX 4-3/4" Cowl induction hood (fits Javelin), Full pin on P 499.00 18
AM-186T   1968-69 AMX 6" Cowl induction hood (fits Javelin), Full pin on P 599.00 20
AM-187T   1968-69 AMX 7" Cowl induction hood (fits Javelin), Full pin on P 599.00 20
AM-189T   1968-69 AMX 9" Cowl induction hood (fits Javelin), Full pin on P 650.00 21
* All Weights are approximate
H- Has small steel inserts for mounting to hinges
P- Full Pin on only. requires 4 hood pins
Part
No.		 Click On Photo for Detail 1972 - 1980 LUV Truck
All LUV Truck Hoods bolt to hinges in the front - except Race-Wt.		 Notes Racer
Net ($)		 Wt
(Lb)* 		 
Hoods LV-100 Hood with L-88 cowl induction 3" Hi 18" Wide H 427.00 21
LV-101 Stock flat hood for 1972-80 LUV Truck H 375.00 20
LV-125 Hood with 5" snorkel H 590.00 20
LV-127   Hood with 7" snorkel H 590.00 20
LV-128   72-80 2-1/4 Cowl induction hood H 599.00 23
LV-231 72-80 7" Cowl Hood. Special Cowl hood 31" wide, bolts to hinges, pin H 649.00 28
LV-283   72-80 3-1/2 Cowl induction hood H 608.00 23
LV-285   72-80 4-3/4 Cowl induction hood H 660.00 24
LV-286 72-80 6 inch Cowl induction hood H 660.00 24
LV-287   72-80 7 inch Cowl induction hood H 725.00 24
LV-289   72-80 9 inch Cowl induction hood H 759.00 24
  LV-210 Front Fiberglass Bumper (ups ok) H 210.00 3

Race Weight - Full Pin on  Hoods 1972 - 1980 LUV Truck
Hoods LV-100T   Race Wt. Hood with L-88 cowl induction 3" Hi 18" Wide, Full pin on P 399.00 16
LV-101T   Race Wt. Stock Flat Hood, Full pin on P 399.00 15
LV-125T   Race Wt. Hood with 5" snorkel, Full pin on P 460.00 17
LV-127T   Race Wt. Hood with 7" snorkel, Full pin on P 460.00 17
LV-128T   Race Wt. 2-1/4 Cowl induction hood, Full pin on P 560.00 18
LV-231T 2-80 7" Cowl Hood. Special Cowl hood 31" wide, Full pin on P 599.00 24
LV-283T   Race Wt. 3-1/2 Cowl induction hood, Full pin on P 525.00 18
LV-285T   Race Wt. 4-3/4 Cowl induction hood, Full pin on P 525.00 20
LV-286T Race Wt. 6 inch Cowl induction hood, Full pin on P 560.00 20
LV-287T   Race Wt. 7 inch Cowl induction hood, Full pin on P 580.00  
LV-289T   Race Wt. 9 inch Cowl induction hood, Full pin on P 650.00  
LV-276T   Race Wt. 5-1/2" Bubble Hood, Full pin on   1170.00    
* All Weights are approximate
H- Has small steel inserts for mounting to hinges
P- Full Pin on only. requires 4 hood pins
Applications: 1972 Chevy LUV truck , 1973 Chevy LUV truck , 1974 Chevy LUV truck , 1975 Chevy LUV truck , 1976Chevy LUV truck , 1977 Chevy LUV truck , 1978 Chevy LUV truck , 1979 Chevy LUV truck , 1980 Chevy LUV truck
Part
No		   Click On Photo for Detail 1971 - 1978 Pinto Notes Racer
Net ($)		 Wt
(Lb)* 		 
Hoods P-101   71-78   Pinto Stock flat hood, bolts to hinges, use pins in front (H) H 389.00 18
P-102   71-78 Hood with twin scoops 13" x 31" x 1-1/2" hi, bolts to hinges, use pins in front (H) H 400.00 20
P-128   71-78 2-1/4 Pinto Cowl induction hood, pin front H 410.00 24
P-183   71-78 3-1/2 Cowl induction hood, pin front H 410.00 24
P-185   71-78 4-3/4 Cowl induction hood, pin front H 479.00 26
P-186   71-78 6 inch Cowl induction hood, pin front H 499.00 26
P-187   71-78 7 inch Cowl induction hood, pin front H 550.00 26
P-189   71-78 9 inch Cowl induction hood, pin front H 560.00 28
P-125   71-78 Hood with 5" snorkel H 499.00 24
P-127   71-78 Hood with 7" snorkel H 550.00 24
  P-103R&L   Pinto Front fenders, 1971-78, w/headlight buckets Each 330.00 9
  P-104   Pinto Front bumper, 1971-73, fiberglass (ups ok) 210.00 2
  P-105   Pinto Rear bumper, 1971-73, fiberglass (ups ok) 210.00 2
  P-106R&L   Pinto Doors with inner structure for 1971-76 (not wagon)  (ups ok) Each 320.00 10
  SP101   Pinto Front Spoiler w/pan (71-73) (ups ok) 210.00 5
  SP102   Pinto Front Spoiler without pan (71-73) (ups ok) 125.00 3
Race - Full Pin on  Hoods 1971 - 1978 Pinto
Hoods P-101T   71-78 Pinto Stock flat hood, Full pin on P 310.00 15
P-102T   71-78 Pinto Hood with twin scoops 13" x 31" x 1-1/2" hi, Full pin on P 380.00 18
P-128T   71-78 Pinto 2-1/4 Pinto Cowl induction hood, Full pin on P 399.00 20
P-183T   71-78 Pinto  3-1/2 Cowl induction hood, Full pin on P 399.00 20
P-185T   71-78 Pinto  4-3/4 Cowl induction hood, Full pin on P 450.00 21
P-186T   71-78 Pinto  6 inch Cowl induction hood, Full pin on P 450.00 21
P-187T   71-78 Pinto  7 inch Cowl induction hood, Full pin on P 499.00 22
P-189T   71-78 Pinto  9 inch Cowl induction hood, Full pin on P 499.00 22
P-125T   71-78 Pinto Hood with 5" snorkel, Full pin on P 460.00 22
P-127T   71-78 Pinto Hood with 7" snorkel, Full pin on P 460.00 22
NOTES: * All Weights are approximate
H- Has small steel inserts for mounting to hinges
P- Full Pin on only. requires 4 hood pins
Applications: 1971 Pinto, 1972 Pinto, 1973, 1974 Pinto, 1975 Pinto, 1976 Pinto, 1978 Pinto, 1978 Pinto
LogoH100opt.jpg (1974 bytes)PICTURES AND FURTHER INFORMATION
can be viewed by scrolling down or clicking part number above.

index.gif (1853 bytes)  ShipCharges.gif (2148 bytes) online3.gif (4005 bytes)

LV-100
This L-88 style hood offers open rear section to allow cold air to enter engine area. This cold air will increase performance and the reduced weight of the fiberglass hood will increase mileage. Full fiberglass inner structure is firmly molded to allow attachment to original hinges.

LV-101
Standard flat hood allows mounting of scoop of your choice. Full inner structure insures durability and high strength. Bolts to original hinges in the front.
 LogoH100opt.jpg (1974 bytes)

  
LV287 (7 inch hi cowl induction) & LV210 (front bumpe                                LUV Hood (LV101) with SC200 at 8 inch high


LV101 with PR79 (9 inch 'Aero' Snorkel)
LV-286opt.jpg (2074 bytes)LV-286 6 inch high cowl induction hood for LUV truck. Features smooth gel coat finish and rigid inner structure. Front has small steel inserts for mounting to hinges. Also available in full "Pin-on" race wt. LV-210 Front fiberglass bumper for LUV truck. Made of durable hand laid fiberglass and features a smooth grey gel coat finish. Can be painted to match the truck or painted black. Easy to install....easy to paint.

lv210opt.jpg (2087 bytes)

LV-231 7 inch high cowl induction hood for LUV truck. Special Cowl scoop 31 inches wide. Features smooth gel coat finish and rigid inner structure. Front has small steel inserts for mounting to hinges. Also available in full "Pin-on" race wt. LV-231T LV-231
LV-289 9 inch high cowl induction hood for LUV truck. Features smooth gel coat finish and rigid inner structure. Front has small steel inserts for mounting to hinges. Also available in full "Pin-on" race wt. For race-weight order part number LV-289T.  

lv-125.JPG (6255 bytes)LV-125
This snorkel hood has the base of the scoop fully molded in. Snorkel top is supplied and must be bolted on. Internal flanges on snorkel top allow internal bolting of the top. This flange also allows the proper use of an air pan kit. Also available in full "Pin-on" race wt.

 

p-101.JPG (7191 bytes)P-101
This hood features a full inner structure for maximum         strength. This hood is de-signed to mount the scoop of your choice. Made from heat resistant resin for maximum durability. Rolled edges on all sides will assure a perfect fit.

p-103.JPG (5998 bytes)P-103
These sturdy fenders will bolt to original chassis. Made from extra high-strength fiberglass; will never rust. Our fenders feature the headlight bucket molded in to reduce overall weight. Extra reinforcement is laminated in at door edge for added stiffness.
P-183
3-1/2 inch high Pinto cowl induction hood. bolts to hinges in the rear
and uses hood pins in the front. Has full fiberglass inner structure
and smooth gel coat top surface for easy prep and painting.
 
p-106.JPG (4584 bytes)P-106R/L
These doors can be mounted to original hinges. Standard latch and door handle can be installed. These doors feature a reverse flange for mounting Lexan windows. Upper window frame is a separate part that is not supplied. Approx. weight is 10 lbs. Stock door panel can also be used.		 p-117.JPG (3979 bytes)P-117
This hood features a cowl induction scoop that is perfectly contoured to the Pinto hood. The scoop dimensions are similar to scoop # SC117. This hood comes complete with a full inner bracing and scoop area is wide open underneath for clearance. Bolts to original hinges and hood pins are recommended for the front.

p-104.JPG (2539 bytes)P-104
Fiberglass bumpers originally designed for racing have now found street application. Will not withstand large impact, but will resist small scrapes. Can be painted the color of the car or painted flat black.

p-105.JPG (2232 bytes)P-105
Rear fiberglass bumper, mainly for drag racing. Very lightweight but strong. Completely hand laminated for lasting strength. All bumpers have quality gelcoat surface for ease of painting.
p-102.JPG (8223 bytes)P-102
This hood is designed for the individuals who want a wild look to their cars. It features twin scoops that are functional. This hood will bolt to original hinges. Rolled edges on all sides eliminates the need to grind to fit the car.

am-101.JPG (7009 bytes)AM-101
AMX hood for direct replacement of original. You can bolt this directly to your hinges. A molded edge on all sides insure a perfect fit. Full inner structure for rigidity and support. The inner structure has special design in the front to hold the original shape and insure "line-up" with the grill
SP-101 71-73 Pinto front spoiler /pan. This front pan has a spoiler built in. Ends have flanges for easy mounting to front of fenders. Spoiler is 4" and is 45" long. Actual overall length of pan+spoiler is 59-3/4". Has smooth grey gel coat finish and ready for painting.
 

 

  
  AM185 4-3/4 high cowl induction hood for68-69 AMX, has molded edges on all sides to insure a perfect fit. Full inner structure assures warp free installation and maximum durability. Small steel inserts are firmly molded in for bolting to hinges. Also available in full "Pin-on" race wt.
Front latch style hoods have provision for latching the front down just like the original.
Front latching hoods cost more because they have extra steel reinforcements made into them.
The other style (pin down) uses racing type hood pins to hold down the front. These cannot be converted to a latching style.
You must drill holes in the front area of the hood for the pins, the pins attach to the radiator core support.
Both styles (latching and pin type) bolt to the original hinges in the rear. Bolts are included. Hood hinge springs must be removed and replaced with our low tension springs or a prop rod.

Most Hoods are also available in full "Pin-on" race wt.
ABOUT | TECH INFO | Q&A  | CATALOG | SHIPPING | CONTACT | HOW to ORDER
index.gif (1853 bytes)  ShipCharges.gif (2148 bytes) online3.gif (4005 bytes)

Toll Free Order Line (877) 735-7772 (7:00 to 4:30 Pacific Time) Mon-Fri

 

 

Copyright 2007 Unlimited Performance Products. All rights reserved. UP22.com, UnlimitedProducts.com, RaceHoods.com