ABOUT | TECH INFO | Q&A  | | SHIPPING | CONTACT | HOW to ORDER | CUSTOMERS COMMENTS
index.gif (1853 bytes)  ShipCharges.gif (2148 bytes) online3.gif (4005 bytes)
               
         

gmbk.jpg (4953 bytes)

1994 - 2002 Chevy S-10 /
 S-15

 
           
           
                             
 

 

   
       
       
       
       
 

GM-483T with PR200 on top   $699
S-10 and S-15   1994-2002
As Seen on Discovery Channel

   GM-483T with PR400 on top     $699.00
S-10 and S-15   1994-2002
 
   
       

S-10 and S-15   1982-2002
Unlimited Products (760) 948-0055
Toll Free (877) 735-7772 (7:00 to 4:30 Pacific Time) Mon-Fri.
Unlimited Products since 1976.......over 300,000 satisfied customers!

Online Ordering is now available most
S-10 Items

 
         
         
Part
No.
1982 - 1993 S-10 & S-15 Notes Racer
Net ($)
Wt
(lb.)*
GM-801 S-10 Flat Hood, pin front H .. 20 299.00

GM-890 S-10 Flat Hood, bolt on H.. 26 399.00

GM-804 Hood with SC-104 'Vette Style' Scoop, pin H 579.00

GM-804B Hood with SC-104 'Vette Style' Scoop, Front Latching H 599.00

GM-828 S-10, S-15 Cowl induction hood 2-1/4" high, pin front H .. 22 349.00

GM-891 S-10, S-15 Cowl induction hood (Same as GM828 except uses front latch) H... 30 395.00

GM-883 S-10/S-15, 3-1/2" high cowl induction hood, pin front H.. 25 419.00

GM-893 S-10/S-15, 3-1/2" high cowl induction hood, Front Latching H.. 32 459.00

GM-885 4-3/4" high Cowl hood, pin front H.. 26 419.00

GM-895 4-3/4" high Cowl hood, uses front latch  H.. 34 459.00

GM-886 6 inch high Cowl hood, pin front H.. 27 500.00

GM-896 6 inch high Cowl hood, uses front latch H.. 36 579.00

GM-887 7 inch high Cowl induction hood, pin down front H.. 27 509.00

GM-897 7 inch high Cowl induction hood, front latching H.. 36 589.00

GM-889 9 inch high Cowl induction hood, pin front H.. 28 539.00

GM-899 9 inch high Cowl induction hood, front latching H.. 37 589.00

       

 

GM-805R&L Front fiberglass fenders Each.. 8 199.00

GM-810 S-10, S-15 Front fiberglass bumper 135.00 4
GM-811 S-10, S-15 Rear fiberglass bumper 135.00   4
GM-811B Rear Bumper Brackets (Set of 2) set 39.00

GM-819 S-10, S-15 Rear roll pan, "Frenched" style 99.00

GM-820 S-10, S-15 Rear roll pan with Vette style light pockets 99.00

GM-821 S-10, S-15 Rear roll pan, squared off license plate (Drop Tag Style) 99.00

GM-870 1 Piece Front End, Flat Hood 38 695.00

GM-872 1 Piece Front End, w/ 2-1/4" Cowl Scoop 40 869.00

GM-873 1 Piece Front End, w/ 3-1/2" Cowl Scoop 42 869.00

GM-875 1 Piece Front End, w/ 4-3/4" Cowl Scoop 42 869.00

GM-876 1 Piece Front End, w/ 6" Cowl Scoop 44 869.00

GM-877 1 Piece Front End, w/ 7" Cowl Scoop 44 969.00

GM-879 1 Piece Front End, w/ 9" Cowl Scoop 47 969.00

GM-860 1 Piece Front End, less hood, "Wrap around style". Has "Flange" for mounting hood 24 599.00

       

 

       
LK-100 Locks and keys for rear of 82-92 Tonneau Covers, each   19.95  
 

 

Part
No.
1982 - 1993 S-10 & S-15 "Race Weight" Hoods
(Full Pin ON)
Notes Racer
Net ($)
Wt
(lb.)*
GM-801T S-10 Flat Hood, Full Pin on 18 285.00

GM-804T Hood with SC-104 'Vette Style' Scoop, Full Pin on 20 529.95

GM-828T S-10, S-15 Cowl induction hood 2-1/4" high, Full Pin on 20 329.95

GM-883T S-10/S-15, 3-1/2" high cowl induction hood, Full Pin on 22 369.95

GM-885T 4-3/4" high Cowl hood, Full Pin on 23 389.95

GM-886T 6 inch high Cowl hood, Full Pin on 23 479.95

GM-887T 7 inch high Cowl induction hood, Full Pin on 23 489.95

GM-889T 9 inch high Cowl induction hood, Full Pin on 24 529.00

GM-876T

S-10, S-15 "Bubble" hood, full pin on, 5-1/2" high

18

799.00

GM-876Tc

S-10, S-15 "Bubble" hood, Carbon Fiber, not carbon look / black gel coat, full pin on, 5-1/2" high

15

1100.00

Part
No.
1994 - 2002 Chevy S-10 / S-15 Notes Racer
Net ($)
Wt
(lb.)*
GM-480 S-10 Dual air Scoop Hood (Ram air) , 2-1/2" high, Pin Front        H..22 415.00

GM-490 S-10 Dual air Scoop Hood (Ram air), 2-1/2" high, Front latch style H...23 509.00

GM-483 S-10 Cowl induction hood 2-3/4" high, smooth top, pin H..20 469.95

GM-493 S-10 Cowl induction hood 2-3/4" high, smooth top
(Same as GM-483 except uses front latch)
H..26 509.95

GM-485 4-3/4" high Cowl hood, has ridge down the middle, Pin  H..22 489.95

GM-495 4-3/4" high Cowl hood, has ridge down the middle,uses front latch  H..28 599.95

GM-486 6 inch high Cowl hood, has ridge, Pin H..22 489.00

GM-496 6 inch high Cowl hood, has ridge, uses front latch H..28 509.95

GM-487 7 inch high Cowl hood, has ridge, Pin H..24 519.95

GM-497 7 inch high Cowl hood, has ridge, uses front latch H...30 549.95

GM-489 9 inch high Cowl hood, has ridge, Pin H...26 579.00

GM-499 9 inch high Cowl hood, has ridge, uses front latch H..32 599.00

GM-419 Rear Roll Pan S-10 / S-15 !994-2002  ups ok 99.00

GM-430 S-10 Front Air Dam 1994 - 2002  10-3/4" high, (3) Front air ducts, "NEW ITEM"  Truck..12 315.00

GM-433 S-10 Front Air Dam 1994 - 2002  10" high, (2) air ducts, no center air duct, "NEW ITEM"  Truck..12 315.00

PR-94 Dual Ram-Air scoop for 94-02 S-10 and S-15 (scoop only) 155.00

     

NOTES: * All Weights are approximate
H- Has small steel inserts firmly molded in  for mounting to hinges
P- Pin on only .
Part
No.
1994 - 2002 Chevy S-10 / S-15 Race Weight Hoods Notes Racer
Net ($)
Wt
(lb.)*
GM-480T S-10 Dual air Scoop Hood (Ram air) , 2-1/2" high, Full Pin on        22 399.00

GM-483T S-10 Cowl induction hood 2-3/4" high, Smooth top, Full Pin on 18 329.95

GM483T.PR400 Aero scoop on GM483T, choose PR400 or PR200   699.00

GM-485T 4-3/4" high Cowl hood, has ridge, Full Pin on 20 459.95

GM-486T 6 inch high Cowl hood, has ridge, Full Pin on 20 459.95

GM-487T 7 inch high Cowl hood, has ridge, Full Pin on 22 459.95

GM-489T 9 inch high Cowl hood, has ridge, Full Pin on 23 529.95

GM-476T

S-10, S-15 "Bubble" hood, full pin on, 5-1/2" high

18

799.00

GM-476Tc

S-10, S-15 "Bubble" hood, Carbon Fiber, not carbon look / black gel coat, full pin on, 5-1/2" high

15

1100.00

   
1994 S-10, 1995 S-10, 1996 S-10, 1997 S-10, 1998 S-10, 1999 S-10, 2000 S-10, 2001 S-10, 2002 S-10
PICTURES AND FURTHER INFORMATION FOR
CHEVY S-10 / S-15
can be viewed by scrolling down or clicking part number above.
ABOUT | TECH INFO | Q&A  | | SHIPPING | CONTACT | HOW to ORDER
index.gif (1853 bytes)  ShipCharges.gif (2148 bytes) online3.gif (4005 bytes)
GM828 &
GM-891

Fiberglass cowl induction hood for 82-93 Chevy S-10 and GMC S-15 trucks. Cowl induction scoop has a 2-1/4" rear overhang, is open in the rear and offers 2-1/4" of extra clearance over a stock flat hood. Full fiberglass inner structure offers maximum strength and low weight. Hinge mounting bolts are firmly molded in for bolt on use. Molded edges on all sides.
Click here for view of hood on truck.
Click here for bottom view (GM891) of hood.

GM891 uses front latch.

gm801.jpg (15631 bytes)GM-801 & GM890
Standard flat hood. Full fiberglass inner structure offers maximum strength and low weight. Hinge mounting bolts are firmly molded in for bolt on use. Molded edges on all sides. Use hood pins in the front.

GM890 uses front latch.

LogoH100opt.jpg (1974 bytes)

 UP22.com the web's giant-giant site for quality fiberglass. Customers agree, fit, price, quality all come together at UP22.com. Please visit UP22.com frequently to see updates, specials and new items. Or visit our factory in Hesperia CA. You can pick up items (call ahead) or just browse our huge factory. You can request to see our lay-up shop and see how our products are made!

gm885opt.jpg (2719 bytes)GM-885 & GM-895 Hood with 4-3/4 high cowl induction scoop. Features molded edges on all sides to insure a perfect fit. Underside has a 'finished-smooth' gel coated look. Directly under the cowl scoop, the hood is open for extra clearance (4-3/4). GM-885 has provision to bolt to hinges in the rear and front must held with pins. GM-895 bolts to hinges the rear but also uses the front latch.

 

As printed in a recent press release:

Unlimited Products, UP22.com makers of quality handmade fiberglass, has added this 1982-93 Chevrolet S-10 and GMC S-15 hood with 4-3/4 inch high cowl induction scoop to their outlaw series of line-up. Not only does the rear facing scoop give a huge increase in underhood space, it picks up air in the best of places for a street or multi-use vehicle - at the base of the windshield. Visit their giant website at UP22.com

The 1982-93 S-10/S-15 hood with 4-3/4 inch high cowl induction scoop (part no. GM-895) is a direct replacement for the OEM steel hood, including provisions for stock hinges and the front latch. It features a full inner bracing for maximum support and weighs only 34 pounds. This hood also fits midsize 1982-93 Chevy blazers and GMC Jimmys. Due to the use of only the finest grades of resin and gelcoat over 7-1/2 oz. fiberglass cloth, Unlimited Products provide at least 25% more strength than the competitors hoods while not increasing weight. This equates to far less flexing and far more longevity than anything currently on the market. Visit UP22.com

 GM-483T with PR400

 

Available in black, PR400 on GM483T

 

 

 GM-483T with PR400



GM-810
Front fiberglass bumper for S-10 & S-15 Chevy & GMC trucks. Mounts to original brackets. Made from durable fiberglass. Can be painted to match truck.
GM-805R/L
Front, light weight fenders for S-10 and S-15 trucks. Now you can replace your front fenders with rust and dent resistant fiberglass. They will bolt to existing places. These fenders can also be used to rid excessive front end weight for better handling and mileage.
GM811 Rear fiberglass bumper for S-10 and S-15 Chevy & GMC trucks. Mounts to original brackets. Made from durable fiberglass. Can be painted to match truck.  
gm870opt.jpg (9065 bytes)GM-870 One piece front end for 82-93 S-10 and S-15. Features smooth grey gel coat finish. Grill area is open for mounting original grill. Front bumper is built in. Headlight areas can be cut out for mounting headlights. Wheel wells have inner flange for strength and support.

GM870detail.jpg (2562 bytes)LogoH100opt.jpg (1974 bytes)


'82-'93 S-10 Front end with SC-204 professionally 
  molded in to "your" exact specs.

 UP22.com the web's giant-giant site for quality fiberglass. Customers agree, fit, price, quality all come together at UP22.com. Please visit UP22.com frequently to see updates, specials and new items. Or visit our factory in Hesperia CA. You can pick up items (call ahead) or just browse our huge factory. You can request to see our lay-up shop and see how our products are made!
 

GM870Ready.jpg (4903 bytes)GM870 One Piece front ends ready to ship.

We ship all items in specially designed shipping containers to insure that all items will arrive in good condition. Our large manufacturing plant in Hesperia is always growing. We are continually adding new items all the time.

gm-816.jpg (8975 bytes)GM-819
"Frenched"
Rear roll pan for 82-93 S-10 & S-15. License plate area is indented. Flange along top for easy mounting.
gm820opt.gif (1683 bytes)GM-820
Rear roll pan

for 82-93
S-10 & S-15. For use with ZR-1 "Vette" style lights.
Flange along top for easy mounting. (Lights from 1991 ZR-1) not included.
gm821opt.gif (1548 bytes)GM-821
"Drop Tag"
Rear roll pan for
82-93 S-10 & S-15 "Squared" License plate holder. Flange along top for easy mounting.
gm804opt.jpg (2579 bytes)GM804 82-93 S-10 & S-15 Hood with Vette Scoop (SC104). Features opening in front and rear. For front latching order GM-804B
gm419opt.jpg (2001 bytes)GM-419 Rear roll pan for
94-02 S-10 & S-15 Indented license plate holder. Flange along top for easy mounting.
GM-483 gm-493.jpg (26026 bytes)
& GM-493

2-3/4 high cowl induction hood for 94-99 S-10. Features a full panel inner structure. Smooth top. Model GM-493 bolts to hinges and latches in the front.gm-493p.jpg (2645 bytes)
Back View of GM-483 & GM-493

gmbk.jpg (4957 bytes)

 

 

LogoH100opt.jpg (1974 bytes)

 UP22.com the web's giant-giant site for quality fiberglass. Customers agree, fit, price, quality all come together at UP22.com. Please visit UP22.com frequently to see updates, specials and new items. Or visit our factory in Hesperia CA. You can pick up items (call ahead) or just browse our huge factory. You can request to see our lay-up shop and see how our products are made!
 
                                     
             
             
             
                                     
  Unlimited has designed special brackets that adapt the S-10 hood to original hood (pivot) location. These brackets are supplied with each hood, bolt on and "hinge" mount style hoods. Full pin on hoods do not use these brackets. These are available separately, but only fit Unlimited's S10 (1994-2003). The special design of these brackets allow adjusting for perfect fit.  
   
                                     

Customer Question:

Hi, I have a '95 S-10 and was wondering a couple of things about your latch style cowl induction hood for my truck. First of all, does it include the spring on the front, and are there holes for the windshield squirters, and is there a place over the drivers side firewall for the vacuum-booster, or whatever that round thing is, to hang from the hood. About the finish of the hood itself, what color(s) does it come in without additional charge and any additional instructions, such as letting it cure for a month or anything before painting. I'm considering ordering it next month and would appreciated the help. Thanks!
(hotmail)

Our reply:

Spring not included in latch, order our part #301.
No holes for sprayer. They can be easily drilled.
"Booster" indent is molded in.
Finish is grey, smooth gel coat, ready for light sanding, primer and paint.
No "letting it cure" for a month. We use a special resin/catalyst system that "cures" in the mold.
Also, we use a high temp. heat resistant on all parts.

 

GM-430  1994 - 2002 S-10 Front Air Dam. Our newest S-10 item. This is exclusive to Unlimited Products. We designed this item from the ground up. It has been performance tested for increased air deflection and reduces under truck air and turbulence by 20% or more. Made of hand laid fiberglass and features smooth gel coat finish. Back side features all proper mounting tabs for easy installation. Can be easily painted to match the color of your truck. No special paints required.
10-3/4 inch high.

                                GM-430
GM-480 & GM-490 1994 - 2002 S-10 Ram air type hood. Unlimited Products exclusive design, featuring 2-1/2" rise. Grey gel coat finish. Scoop openings are not cut out. Striping in this photo is for photo only, hood is shipped less striping. Underside is finished and all edges are finished. GM-480 attaches to hinges in the rear, but uses racing type pins for front hold down. Check our accessories page for pins. GM-490 attaches to hinges in the rear and front uses standard factory latch, no pins required. Prop rod is required to hold hood in open position.


GM-480 / GM490

 

 

     LogoH100opt.jpg (1974 bytes)

GM-433  (No photo) 1994 - 2002 S-10 Front Air Dam (same as GM430, but no center air duct). Another new S-10 item. This is also exclusive to Unlimited Products. We designed this item from the ground up. It has been performance tested for increased air deflection and reduces under truck air and turbulence by 20% or more. Made of hand laid fiberglass and features smooth gel coat finish. Back side features all proper mounting tabs for easy installation. Can be easily painted to match the color of your truck. No special paints required.
10 inch high.
 
 
    New Item!
GM-430 Front Air Dam $279.95
PR-94 Dual Ram-Air scoop. Contoured to fit 94-02 S-10 and S-15 hood. Scoops are 8 inches wide x 1-1/4 high. Overall height at rear is 1-1/2 inches. Width of 'scoop' at rear is 32-1/2. Overall width, including flange is 37-1/2 wide at rear. 40 inches long.

pr94opt.jpg (5832 bytes)

ABOUT | TECH INFO | Q&A  | | SHIPPING | CONTACT | HOW to ORDER
index.gif (1853 bytes)  ShipCharges.gif (2148 bytes) online3.gif (4005 bytes)

Toll Free (877) 735-7772 (7:00 to 4:30 Pacific Time) Mon-Fri

GM-870....$689.00

One piece front end for S-10 and S-15  1982 1993
now molded with black gel coat

 UP22.com the web's giant-giant site for quality fiberglass. Customers agree, fit, price, quality all come together at UP22.com. Please visit UP22.com frequently to see updates, specials and new items. Or visit our factory in Hesperia CA. You can pick up items (call ahead) or just browse our huge factory. You can request to see our lay-up shop and see how our products are made!

 


Questions about our products, shipping costs, current prices and sales policies can be obtained by calling:
Toll Free (877) 735-7772 or From Canada or other countries - (760) 948-0055
Copyright © 2020 Unlimited Products. All rights reserved.
Follow us on FaceBook