ABOUT | TECH INFO | Q&A  | | SHIPPING | CONTACT | HOW to ORDER | CUSTOMERS COMMENTS
index.gif (1853 bytes)  ShipCharges.gif (2148 bytes) online3.gif (4005 bytes)
 

                 
        

  
1979-1993 Race Doors  
MU-712R&L $229 each

   
       
 


AB-Mustang Hood
$899.00 or $1100 carbon
12" high or less (specify)


877 735-7772
 

 

     
   


MU781    87-93  $699.00
Original headlights can be "Easily" installed

Carbon Fiber model available MU781C $1000

     
         

 MUSTANG 83-86 &  MUSTANG 87-93
& 1979-1982

Unlimited Products
Toll Free (877) 735-7772
(7:00 to 4:30 Pacific Time) Mon-Fri


 

87-93 Mustang Hood with Bubble Scoop
(Black Gel coat)
MU-776T    6 inch      $399.00
Carbon Fiber $1000.00 (Black Gel Coat)


87-93 with windshield length cowl
MU-735T     $580.00


83-86     MU-374T  4" and extended


MU756cc
Carbon Fiber dash for 1983-1993 Mustang
Carbon Fiber construction. Clear gel coat for the carbon fiber look, Race model
 

 
Online Purchases "Secure" by PayPal when you use our -->
  1979 - 1982 Mustang
(Four-Eyed..4 head lites) Not SVO
(Special Vehicle Operations Dept.)

 

     
         
MU-381

79-82 Mustang "4-Eyed" Front wrap around front end with built in 11" chin spoiler (less hood), black gel  coat. Not SVO
NOTE: Fits 1979- 1982 Mustang, but must use '83 style hood.

  699.00

 

 
         
Part
No
1983 - 1986 Mustang
(Four-Eyed) Not SVO
Notes Racer Net
($)
Wt
(Lb)*
         
Hoods MU-328 2-1/4" high Cowl induction hood, pin front H 299.00 18
MU-391 2-1/4" high Cowl induction hood, front latching H 399.00 27
MU-384 4" high Cowl induction hood, pin front H 299.00 20
MU-394 4" high Cowl induction hood, front latching H 399.00 29
MU-386 6 inch high Cowl induction hood, pin front H 469.00 20
MU-396 6 inch high Cowl induction hood, front latching H 559.00 29
MU-387 7" high Cowl induction hood, pin front H 489.00 22
MU-397 7" high Cowl induction hood, front latching H 569.00 32
MU-389 9" high Cowl induction hood, pin front H 499.00 24
MU-399 9" high Cowl induction hood, front latching H 589.00 33

MU-712R&L

Doors, Race 1979-1993

 each

229.00

10

MU-712R&L Carbon Doors, Race 1979-1993 Carbon, black

each

429.00

9

DH400

Door Hinge, Latch and Lever Kit,  pair (for 2 doors)
These hinges allow lifting the door off the hinges when opened 
 

340.00

MU-381

83-86 Mustang "4-Eye" Front wrap around front end with built in 11" chin spoiler (less hood) , black gel coat  

699.00

MU-381c

83-86 Mustang "4-Eye" Carbon Fiber Front Wrap around front end with built in 11" chin spoiler (less hood) , black gel coat  

1000.00

         

MU-755

Front air dam / chin spoiler 11" for 83-93, black gel coat  

225.00

MU-756c

Mustang Dash Board 1983-1993. Carbon Fiber construction. Race model. Weight 10 lbs

UPS

380.00

MU-756

Mustang Dash Board 1983-1993. All fiberglass construction. Race model. Weight 12 lbs

UPS

249.95

MU-756cc

Mustang Dash Board 1983-1993. Carbon Fiber construction. Clear gel coat for the carbon fiber look, Race model. Weight 10 lbs UPS

480.00

Part
No
1983 - 1986 Mustang
(Four-Eyed)
"Race Weight" Hoods & other parts
Notes Racer Net
($)
Wt
(Lb)*
Hoods MU-328T 2-1/4" high Cowl induction hood, full pin on   265.00 17
MU-384T 4 high Cowl induction hood, full pin on   275.00 18
MU-324T
(MU-374T)
4 inch high Cowl induction hood, 2" in the front, special wide scoop, smooth top and extended, full pin on
Box size 7-1/2 x 79 x 64 shipping weight 35 lbs includes carton/box
  449.95 18
MU-386T 6 inch high Cowl induction hood, full pin on   449.95 18
         
MU-387T 7" high Cowl induction hood, full pin on   449.95  
20
MU-389T 9" high Cowl induction hood, full pin on   509.95 21
MU-3AB Aero-Bubble Hood, 1983-1986 Mustang, (12" high or less, specify) full pin on   899.00
MU-3ABc Aero-Bubble Hood, CARBON,1983-1986 Mustang, (12" high or less, specify) full pin on   1100.00
MU-3ABd Aero-Bubble Hood, CARBON, Hood is black gel coat, scoop portion has carbon look, 1983-1986 Mustang, (12" high or less, specify, 12,11,10,9) full pin on   1600.00
MU-376T 6" high "Bubble" Hood, 1983-1986 Mustang, full pin on   399.00
         

MU-712R&L

Doors, Race 1979-1993

wt 10 each

229.00

MU-712R&L Carbon Doors, Race 1979-1993 Carbon, black

each

429.00

9

DH400

Door Hinges, Latches and Lever Kit, for a pair of doors Set

340.00

MU-381

83-86 Mustang "4-Eye" Front wrap around front end with built in 11" chin spoiler (less hood), black gel  coat
Box size 70-1/8 x 30-1/4 x 78-3/4 shipping weight 103 includes carton/box
 

699.00

MU-381c

83-86 Mustang "4-Eye" Carbon Fiber Front wrap around front end with built in 11" chin spoiler (less hood) , black gel coat
 
 

1000.00



Tree Kit # TK-300.....$145.00
 
This kit is designed for the full wrap around front ends like the MU781, CH281, C700, V701, 55130, CH881, etc.

         

MU-715T

Rear Hatch for 79-93 Mustang Hatch back, full pin or dzus, race weight Truck Freight

199.00

7

MU-715T-C

Rear Hatch, Carbon Fiber for 79-93 Mustang Hatch back, full pin or dzus, race weight Truck Freight 400.00

5

         

MU-716T

Rear Deck Lid for 79-93 Mustang notch back, full pin or dzus, race weight /
Actual size of item 26.57.5. Weight 12 lbs
UPS
(M.A.B.)
150.00

MU-716T-C

Carbon Fiber Rear Deck Lid for 79-93 Mustang notch back, full pin or dzus, race weight. Weight 10 lbs UPS
(M.A.B.)
300.00

MU-755    

Front air dam / chin spoiler 11" for 83-93, comes in black gel coat Truck

225.00

MU-756

Mustang Dash Board 1983-1993. All fiberglass construction. Race model. Weight 10 lbs

UPS

249.95

MU-756c

Mustang Dash Board 1983-1993. Carbon Fiber construction. Smooth black gel coat, Race model. Weight 9 lbs

UPS

380.00

MU-756cc Mustang Dash Board 1983-1993. Carbon Fiber construction. Clear gel coat for the carbon fiber look, Race model. Weight 9 lbs UPS

480.00

Part
No
1987 thru 1993 Mustang
(Fox Body)
Notes Racer Net
($)
Wt
(Lb)*
Hoods          
MU-701 Stock flat hood, Pin front H 299.00     20
MU-790 Flat hood, front latching H 399.00 26
MU-728 2-1/4" high Cowl induction hood, Pin front H 349.00 20
MU-791 2-1/4" high Cowl induction hood, front latching H 399.00 26
MU-784 4" high Cowl induction hood, Pin front H 349.00 20
MU-794 4" high Cowl induction hood, front latching H 409.00 26
MU-786 6 inch high Cowl induction hood, Pin front H 469.00 20
MU-796 6 inch high Cowl induction hood, front latching H 549.00 26
MU-787 7" high Cowl induction hood, Pin front H 479.00 22
MU-797 7" high Cowl induction hood, front latching H 559.00 30
MU-789 9" high Cowl induction hood, Pin front H 489.00 30
MU-799 9" high Cowl induction hood, front latching H 559.00 30
MU-775 Hood with 5" snorkel, Pin front H 499.00 19
MU-777 Hood with 7" snorkel, Pin front H 499.00 20
         
MU-782A Hood with AC952 Super cowl Scoop, 9 inches high, open rear and front, Pin front H 479.00
MU-792A Hood with AC952 Super cowl Scoop, 9 inches high, open rear and front, Front Latching style H 559.00

MU-712R&L

Doors, Race 1979-1993

wt 10 each

229.00
MU-712R&L Carbon Doors, Race 1979-1993 Carbon, black

each

429.00

9

MU-781

NEW! Wrap around front end with built in 11" chin spoiler (less hood)

Boxed wt 80 lbs, dims of box 31-71-79

wt 22 approx.

699.00

MU-781C

NEW! Wrap around front end with built in 11" chin spoiler (less hood) CARBON FIBER (Black Gel Coat) Boxed wt 80 lbs, dims of box 31-71-79  

1000.00

18

MU-756

NEW! Mustang Dash Board 1983-1993. All fiberglass construction. Race model, Black Gel Coat. Weight 12 lbs

UPS

249.95

MU-756c

NEW! Mustang Dash Board 1983-1993. All carbon fiber construction. Race model, Black Gel Coat. Weight 10 lbs

UPS

380.00

MU-756cc

NEW! Mustang Dash Board 1983-1993. All carbon fiber construction. Race model, clear gel coat, to show the carbon. Weight 10 lbs

UPS

480.00

MU-715T

Rear Hatch for 79-93 Mustang Hatch back, full pin or dzus, race weight

Truck Freight

199.00

7

MU-716T

Rear Deck Lid for 79-93 Mustang Notch back, full pin or dzus, race weight. Weight 12 lbs UPS 150.00

MU-716T-C

Carbon Fiber Rear Deck Lid for 79-93 Mustang notch back, full pin or dzus, race weight Weight 10 lbs UPS 300.00



Tree Kit # TK-300.....$145.00
 
This kit is designed for the full wrap around front ends like the MU781, CH281, C700, V701, 55130, CH881, etc.

         
NOTES: * All Weights are approximate
H- Has small steel inserts for mounting to hinges
      LogoH100opt.jpg (1974 bytes)
P- Full Pin on only .
Part
No
1987 thru 1993 Mustang
(Fox Body)
"Race Weight" Hoods & Hatch
Standard Fiberglass and "Carbon"
Notes Racer Net
($)
Wt
(Lb)*
Hoods MU-700XT 5" high cowl induction, windshield length scoop, cowl scoop is smooth top, full pin on
MU-701T/SC226
  499.00
MU-701T Stock flat hood, Full pin on   275.00 18
MU-701Tc Stock flat hood, carbon fiber, Full pin on   475.00 16
MU-784T 4" high Cowl induction hood, Full pin on   289.00 18
MU-784Tc 4" high Cowl induction hood, carbon fiber, Full pin on   489.00 16
MU-786T 6 inch high Cowl induction hood, Full pin on   455.00 18
MU-787T 7" high Cowl induction hood, Full pin on   499.00 20
MU-789T 9" high Cowl induction hood, Full pin on   519.95 26
MU-735T 5" Windshield length cowl hood   580.00
MU-776T 87-93 Mustang Hood with Bubble Scoop (PR702)    6 inch   399.00
MU-776TC "Carbon" 87-93 Mustang Hood with Bubble Scoop (PR702)    6 inch   998.00

MU-775T Hood with 5" snorkel (old style), Full pin on   529.95 18
MU-777T Hood with 7" snorkel (old style), Full pin on   529.95 18
MU782TA Hood with AC952 Super cowl Scoop, 9 inches high, open rear and front, Full pin on   439.95
MU-7AB Aero-Bubble Hood, 1987-1993 Mustang, Hood and scoop are black gel coat (12" high or less, specify) full pin on   899.00
MU-7ABc Aero-Bubble Hood, CARBON, Hood and scoop are black gel coat 1987-1993 Mustang, (12" high or less, specify, 12,11,10,9) full pin on   1100.00
MU-7ABd Aero-Bubble Hood, CARBON, Hood is black gel coat, scoop portion has carbon look, 1987-1993 Mustang, (12" high or less, specify, 12,11,10,9) full pin on   1600.00

MU-715T

Rear Hatch for 79-93 Mustang, full pin or dzus, race weight

Truck Freight

199.00

7

MU-716T

Rear Hatch for 79-93 Mustang "NOTCH BACK", full pin or dzus, race weight. Weight 12 lbs UPS 150.00

MU-756

Mustang Dash Board 1983-1993. All fiberglass construction. Race model. Weight 12 lbs

UPS

249.95

MU-756C

Mustang Dash Board 1983-1993. All CARBON FIBER construction. Race model, Black gel coat. Weight 10 lbs

UPS

380.00

MU-756cc Mustang Dash Board 1983-1993. All Carbon Fiber construction. Clear gel coat for the carbon fiber look, Race model. Weight 10 lbs UPS

480.00

   
PICTURES AND FURTHER INFORMATION FOR
MUSTANG 67 - 93
can be viewed by scrolling down or clicking part number above.
ABOUT | TECH INFO | Q&A  |  | SHIPPING | CONTACT | HOW to ORDER
index.gif (1853 bytes)  ShipCharges.gif (2148 bytes) online3.gif (4005 bytes)

mu-328.JPG (8239 bytes)MU-328 & MU-391
83-86 Mustangs can get the extra clearance needed with Unlimited's new hood.  Bolts to original hinges; this hood has an additional 2-1/4" of clearance.

LogoH100opt.jpg (1974 bytes)

mu-728a.JPG (2537 bytes)MU-728 & MU-791
87-93 Mustang hood with 2-1/4" high cowl induction scoop. MU728 bolts to hinges, while MU791 bolts to hinges and uses front latch. Rolled edges on 4 sides insure a perfect fit. Full inner structure (bracing) is built in to provide maximum rigidity and strength. Cowl induction design allows extra clearance for special carburetion and also gives power increase by forcing fresh air to enter engine compartment from the cowl.

MU784 and MU794  87-93 Mustang hood with 4" high cowl induction scoop. MU784 bolts to hinges, while MU794 bolts to hinges and uses front latch. Rolled edges on 4 sides insure a perfect fit. Full inner structure (bracing) is built in to provide maximum rigidity and strength. Cowl induction design allows extra clearance for special carburetion and also gives power increase by forcing fresh air to enter engine compartment from the cowl. For race weight hood, order part number MU784T UP22.com is your best source for fiberglass auto and truck body parts. We manufacture all items in our Hesperia CA facility. Please visit our factory in Hesperia or call for more information. Toll free (877) 735-7772. All racers agree UP22.com has all the best parts!

MU782A & MU792A
For 1987-1993 Mustang.
Hood with AC952 Super cowl Scoop, 9 inches high, open rear and front, Pin front or Front latching available. Full pin on also available (part number MU-782TA).


           


MU-700X


Hood with PR702 "Bubble" Scoop (MU-776T)


MU-781
New Item! Full wrap around front end for 87-93 Mustang.
Hood flanges for mounting hood. Full air dam. Wheel wells fully flanged.
Original working headlights and markers can be easily installed.

For Carbon Fiber Model: MU781C


MU-712R & MU-712L

79-93 Mustang door
With front flange to "set" fender against.
Flanged window frame and inner structure.

Customers comment:

"Hey guys at Unlimited, @#% awesome doors! They fit perfect, the body lines are perfect, they follow the the door jam around the window, @#% perfect! You guys have come a long way!
 

MU-381


MU-381  1983 -1986 (Four-Eyed) Mustang "Full Wrap" Front End

 
DH-400     Door Hinge, Latch and Lever Kit, for one door
   


MU755 11" Hi for 83-93 Mustang

MU-324T
83-86 Mustang hood with 4" cowl induction hood, smooth top, extended to windshield.

4 inch high Cowl induction hood, 2" in the front, special wide scoop, smooth top and extended, full pin on

MU-384 4" high cowl induction hood for 83-86 Mustang. This hood bolts to hinges in the rear and uses hood pins in the front. Underside has rigid inner structure for proper support. All fiberglass construction and exterior has smooth grey gel coat.

 UP22.com the web's giant-giant site for quality fiberglass. Customers agree, fit, price, quality all come together at UP22.com. Please visit UP22.com frequently to see updates, specials and new items. Or visit our factory in Hesperia CA. You can pick up items (call ahead) or just browse our huge factory. You can request to see our lay-up shop and see how our products are made!

ms-78.jpg (3726 bytes)MS-78

74-78 Mustang front air dam. 6 inches high. Ends wrap around and top edge has mounting flange.

MU756
 Full fiberglass dash for 1983-1993 Mustangs. Race Model.

(For Carbon Fiber, black gel coat MU756c)

ms82opt.jpg (2513 bytes)MS-82 79-82 Mustang front air dam. 3-1/2 inches high. Sides are 14 inches long and wrap around. Top edge has mounting flange.

MU756cc
Carbon Fiber dash for 1983-1993 Mustang
Carbon Fiber construction. Clear gel coat for the carbon fiber look, Race model

 

ABOUT | TECH INFO | Q&A  | | SHIPPING | CONTACT | HOW to ORDER
index.gif (1853 bytes)  ShipCharges.gif (2148 bytes) online3.gif (4005 bytes)

Toll Free (877) 735-7772 (7:00 to 4:30 Pacific Time) Mon-Fri

 


Questions about our products, shipping costs, current prices and sales policies can be obtained by calling:
Toll Free (877) 735-7772 or From Canada or other countries - (760) 948-0055
Copyright © 2020 Unlimited Products. All rights reserved.
Follow us on FaceBook

Copyright 2007 Unlimited Performance Products. All rights reserved. UP22.com, UnlimitedProducts.com, RaceHoods.com