FIBERGLASS TOOLS
Demolding Wedges, Spreaders, Squeegees
"Quantity Pricing
Available"*
For the "Best" in top quality, chose "Unlimited"
Scroll down or click
on a product for pictures and further information.
Unlimited Products
(760) 948-0055 or toll free (877) 735-7772
8770 Caliente Rd. Oak Hills CA 92344
(7:00 to 4:30 Pacific Time) M-F
Unlimited Products is THE largest manufacturer of these plastic wedges, bondo spreaders and resin squeegees, and are mostly sold through
distribution throughout the world. Also marketed on Amazon under the
name "Skipjack Wedges". We have numerous distributors and
dealers for this product line. We sell them from our factory at
the prices and quantities listed below. Please do not hesitate to
call and order these items, no order too small, even one wedge ok. These
items are not import items. We are proud to have been producing
these TOP quality plastic wedges since 1993. We use only
the finest "Virgin" materials to maintain the impact toughness of
each and every wedge.
Made in the USA
These White wedges, made of high grade plastic, are the most commonly used wedges because of their low cost. These are the most popular demolding wedges used in the fiberglass industry. They are used by inserting the wedge into the edge of the mold. The wedge can then be carefully pushed further to aid in demolding the part. For tough parts, many wedges can used around all edges. Many shops will keep these on hand in abundance to aid in demolding the parts. Because these are made of high impact plastic, the insertion edge keeps it's edge without breaking. After many uses, this edge can be re-shaped again and again. Plastic wedges are used throughout the fiberglass industry to avoid damaging the mold and the part.
Item #
Each
10 qty
Each
100 qty
1/2"Thick
and select quantity...
and select quantity..
3-1/4"
1"Thick
and select quantity..
1" Thick
and select quantity...
The Pink wedges are flexible making them ideal for removing parts from compound molds or where the fiberglass is thin.
Item #
Each
10 qty
Each
100 qty
1/2"Thick
and select quantity...
and select quantity...
Standard
3-1/4"
1"Thick
and select quantity...
Standard
1" Thick
and select quantity...
Made from a blended plastic, the Deluxe wedges are firmer than the Standard wedges, however they are still very economic.
Sizes are the same as the Standard wedges.
Item #
Each
10 qty
Each
100 qty
1/2"Thick
and select quantity...
and select quantity...
and select quantity...
and select quantity...
The Blue wedge, although still flexible, is stiffer then the Pink wedge and is ideal for applications where a firmer wedge is need.
Item #
Each
10 qty
Each
100 qty
1/2"Thick
200 qty
and select quantity...
3/4"Thick
and select quantity...
1"Thick
and select quantity...
The Green wedges are made from high impact nylon which makes them ideal for applications where durability and reduced mold damage is preferred. The Green wedge will typically outlast the White standard wedge by a ratio of 5-1. This wedge will retain its edge integrity for a much longer period of time making it ideal for the high volume shop looking to reduce cost. Plastic wedges are used throughout the fiberglass industry to avoid damaging the mold and the part.
*Will outlast the white econo wedges about 5-1
Item #
Each
10 qty
Each
100 qty
High Performance, Long Lasting
1-1/2"
1/2"Thick
and select quantity...
2-1/4"
3/4"Thick
and select quantity...
3-1/4"
1"Thick
and select quantity...
1-3/4"
1/2"Thick
and select quantity...
Thin Line
The Thin Line wedges are perfect
for those hard to reach places. The White is rigid where the
Pink is flexible to get into curved molds.
Plastic wedges are used throughout the fiberglass industry to
avoid damaging the mold and the part.
Item #
Each
10 qty
Each
100 qty
1-3/4"
1/2"Thick
and select quantity...
1-3/4"
1/2"Thick
and select quantity...
rigid than standard wedges
1-3/4"
1/2"Thick
and select quantity...
Rigid
1-3/4"
1/2"Thick
and select quantity...
1-3/4"
1/2"Thick
New
The Blue handle wedge is made from a poly material making it stiff and rugged. It has a comfortable handle (with great balance) which makes it ideal for use as an edge hammer, while also having a wedge shaped end for easy and quick insertion into the mold. The tip can be ground for extended service life. “Shoulders” where the handle meets the widened area are designed to allow another wedge to push for deep cavity insertion. This handle wedge is generally used for tapping or driving other wedges into the mold and to "break" edges where the fiberglass part meets the edge of the mold. Plastic wedges are used throughout the fiberglass industry to avoid damaging the mold and the part.
Item #
Each
10 qty
Each,
full pack
3-1/4"
1"Thick
and select quantity...
3-1/4"
1"Thick
Temp Not Available
3-1/4"
1"Thick
Overall length:
15-1/4"
Temp Not Available
The Tomahawk Wedge is a beveled wedge which is ideal for de-molding larger parts such as boat hulls. These wedges are placed in several areas of the mold to maintain pressure in desired areas. Air gun, air injector model available with or without air gun. 7023AG comes with air gun. 7023A is drilled and and has 1/4" pipe thread ready for your fittings. 7023A-1 comes with brass fitting that will accept most air guns. Air gun models make it easier to de-mold difficult parts.
Item #
Each
10 qty
Each,
Full Pack
1-9 Pcs $15
10-20 Pcs $15
21 up call
3-1/4" X 2"
1"Thick
and select quantity...
3-1/4" X 2"
1"Thick
To Order Call 877 735-7772
In stock, ships in 1-3 days
3-1/4" X 2"
1"Thick
3-1/4" X 2"
1" Thick
Overall length:
10-1/2"
In stock, ships in 1-3 days
The Translucent spreader is stiffer than commonly available spreaders. It is a special chemically resistant material which will not permanently bond to body putty, which can easily be peeled off when hard. The edge is very straight and has a precise contour for precise application of putty without streaking. Also known as "Bondo Spreader". These bondo spreaders have many other uses, such as cleaning smooth surfaces, table tops etc.
Size is 5-1/4" x 3".
Item #
Each
10 qty
Each
144 qty
and select quantity...
Hand Lay-Up Resin Squeegee, BD2
Revolutionary Product!
This very economical flexible Red
spreader/squeegee is ideal for:
Hand layup / Applying polyester resins and is
chemically resistant to acetone, resin, etc. The flexibility of
the Red squeegee works extremely well for hand lay-up of resin to
fiberglass cloth and a "HIGH GLASS TO RESIN RATIO" is easily
achieved.
Size is 5-1/4" x 3". These soft bondo spreaders have
many other uses, such as spreading bondo (body filler) in a
"Curved shape". These red spreaders must be tried to
appreciate, as they are not available in the auto body
industry but have great success in the fiberglass industry
Item #
Each
10 qty
Each
144 qty
and select quantity...
The White spreader is a very rigid nylon to maintain high integrity in abrasive applications. It is also ideally suited for mold and mixing container clean-up. Well suited for the unique requirements of the Marble industry. Plastic wedges are used throughout the fiberglass industry to avoid damaging the mold and the part. The stiff nylon bondo spreaders have many other uses, such as scraping ice from a windshield.
Size is 5-1/4" x 3".
Item #
Each
10 qty
Each
144 qty
and select quantity...
"Bullet Proof" Scraper,
BD6
NEW
!
The "Toughest" Product on the Market
This Clear spreader is a very,very
rigid polycarbonate scraper
to maintain high integrity in very abrasive
applications. It is also ideally suited for mold and mixing
container clean-up. Well suited for the unique requirements of
the Marble industry. Plastic wedges are used throughout the
fiberglass industry to avoid damaging the mold and the part. The
stiff polycarbonate item is more of a scraper than a spreader
and has have many other uses, such as scraping ice from a
windshield, removal of old tape,etc.
The Best Tape Removal Tool
Size is 5-1/4" x 3".
Item #
Each
10 qty
Each
144 qty
and select quantity...
36" long rubber stock for cutting into smaller lengths as needed. This special rubber compound has been formulated to withstand fiberglass cleanup solvents, acetone and water-based solvents. Flexible enough to match the contour of most irregular shapes. Edge is a special wedge shape to allow proper pressure in spreading the resin and easily forcing out air bubbles. The 6" version is already cut to the standard length as used by most shops. Also known as a "Resin Squeegee". 36" x 3-1/2" tall x .360" thick
Made in the USA, it replaces the squeegee that was the industry standard for at least 25 years that sadly, is not the squeegee it once was.
3-1/2" Tall<----------------------------36"------------------------------>
Item #
Size
Typical Usage
Each
10 qty
Each
100 qty
3-1/2"
and select quantity...
3-1/2"
and select quantity...