ABOUT | TECH INFO | Q&A  | CATALOG | SHIPPING | CONTACT | HOW to ORDER | CUSTOMERS COMMENTS
index.gif (1853 bytes) GetCatalog.gif (3117 bytes) ShipCharges.gif (2148 bytes) online3.gif (4005 bytes)
                               
       

BARRACUDA 1967- 1974
Scroll down or click on part number for pictures and further information!

     
             
             
                           


Giant Catalog with over 3000 fiberglass parts

  70cudaa.jpg (5876 bytes)

 
 
         
         
 

                     
   

Race Weight Fiberglass.."RW" Please specify when ordering.
example: Standard hood 32 lbs (H283).........Race Weight (H283T-RW) 15 lbs
Doors: Standard 15 lbs.........Race Weight 10 lbs

     
         
         
         
                               
     

Toll Free Order Line (877) 735-7772 (7:00 to 4:30 Pacific Time) Mon-Fri
To place an order call (877) 735-7772 or jot down the part number, description and price, then go to On Line Ordering

   
         
                               
Part
No.
LogoH100opt.jpg (1974 bytes)1967 Barracuda - 1968 Barracuda Notes Racer
Net ($)
Wt
(Lb)*
BR-167 67-68 Barracuda Stock Hood (has ridges; no metal louvre inserts), pin front H 249.95 20

BR-162

67-68 Barracuda Hemi-Cuda Hood (hood with SC-102 Scoop), pin front

H

449.00

22

BR-714

67-68 Barracuda Hood with Six Pack Scoop  (hood with PR-5 Scoop), pin front

H

449.00

22

BR-783

67-68 Barracuda 3-1/2  Cowl induction hood, pin front

H

460.00

22

BR-785

67-68 Barracuda 4-3/4 Cowl induction hood, pin front

H

460.00

23

BR-786

67-68 Barracuda 6 Inch Cowl induction hood, pin front

H

470.00

23

BR-787

67-68Barracuda  7 Inch Cowl induction hood, pin front

H

480.00

23

BR-789

67-68 Barracuda 9 Inch Cowl induction hood, pin front

H

525.00

23

BR-710

67-68 Barracuda Front Bumper (ups ok)

119.95

      3

BR-710

67-68 Barracuda Rear Bumper (Same as Front Bumper) (ups ok)

119.95

3

BR-719R/L

67-68 Barracuda Front Bumper Brackets, set of 6 pieces (ups ok)

set

55.00

BR-703

67-68 Barracuda Trunk Lid, Pin On (ups ok)

129.95

BR-703H

67-68 Barracuda Trunk Lid, uses front latch (ups ok)

H

169.95

1967 Barracuda - 1968 Barracuda "Race Weight" Hoods
BR-167T 67-68 Barracuda Stock Hood (has ridges; no metal louvre inserts), Full pin on P 219.00 17

BR-162T

67-68 Barracuda Hemi-Cuda Hood (hood with SC-102 Scoop), Full pin on

P 399.00 19

BR-714T

67-68 Barracuda Hood with Six Pack Scoop  (hood with PR-5 Scoop), Full pin on

P

349.00

19

BR-783T

67-68 Barracuda 3-1/2  Cowl induction hood, Full pin on

P 399.00 18

BR-785T

67-68 Barracuda 4-3/4 Cowl induction hood, Full pin on

P 399.00 18

BR-786T

67-68 Barracuda 6 Inch Cowl induction hood, Full pin on

P 399.00 19

BR-787T

67-68Barracuda  7 Inch Cowl induction hood, Full pin on

P 429.00 20

BR-789T

67-68 Barracuda 9 Inch Cowl induction hood, Full pin on

P 439.00 20
Part
No.
1969 Barracuda Notes Racer
Net ($)
Wt
(Lb)*
BR-100 69 Cuda stock flat hood, pin front H 249.95 20
BR-902 1969 Cuda hood with Hemi-Cuda scoop (SC-102 Scoop), Pin on H 449.00  
BR-914 1969 Cuda hood with 6-Pack scoop (PR-5 Scoop), Pin on H 449.00  

BR-983

69 Cuda 3-1/2 Cowl induction hood, pin front

H

460.00

22

BR-985

69 Cuda 4-3/4 Cowl induction hood, pin front

H

460.00

23

BR-986

69 Cuda 6 inch Cowl induction hood, pin front

H

470.00

24

BR-987

69 Cuda 7 inch Cowl induction hood, pin front

H

480.00

24

BR-989

69 Cuda 9 inch Cowl induction hood, pin front

H

525.00

24
         
         
1969 Barracuda "Race Weight" Hoods
BR-100T 69 Cuda stock flat hood, Full pin on H 219.00 17
BR-902T 1969 Cuda hood with Hemi-Cuda scoop (SC-102 Scoop), Full pin on H 399.00 20
BR-914T 1969 Cuda hood with 6-Pack scoop (PR-5 Scoop), Full pin on H 399.00 20

BR-983T

69 Cuda 3-1/2 Cowl induction hood, Full pin on

H

399.00

19

BR-985T

69 Cuda 4-3/4 Cowl induction hood, Full pin on

H

399.00

20

BR-986T

69 Cuda 6 inch Cowl induction hood, Full pin on

H

399.00

20

BR-987T

69 Cuda 7 inch Cowl induction hood, Full pin on

H

429.00

20

BR-989T

69 Cuda 9 inch Cowl induction hood, Full pin on

H

439.00

21
         
         
Part
No.
1970-1974 Barracuda Notes Racer
Net ($)
Wt
(Lb)*
BR-101 70-74 Barracuda Stock flat hood (hinge mount), pin front H   269.95 26
BR-173 70-74 3-1/2" High Barracuda Cowl hood. Cowl induction scoop starts to rise, at 8" from front of hood. Pin front H 429.00 30
BR-175 70-74 4-3/4" High Barracuda Cowl hood. Cowl induction scoop starts to rise, at 8" from front of hood. Pin front H 429.00 32
BR-176 70-74 6 Inch High Barracuda Cowl hood, Cowl induction scoop starts to rise, at 8" from front of hood. Pin front H 449.00 34
BR-177 70-74 7 inch High Barracuda Cowl Hood, Cowl induction scoop starts to rise, at 8" from front of hood. Pin front H 460.00 35
BR-179 70-74 9 inch High Barracuda Cowl Hood, Cowl induction scoop starts to rise, at 8" from front of hood. Pin front H 529.00 38
BR-102 Barracuda R/T Hood (with scoop inserts installed), (hinge mount), pin front H   299.00 24
BR-125 Barracuda Hood with 5" snorkel (hinge mount), pin front H   350.00 26
BR-127 Barracuda Hood with 7" snorkel (hinge mount), pin front H  350.00 26
BR-144 1970, 1971, 1972, 1973  & 1974 Barracuda hood with six-pack scoop (hinge mount), pin front H   419.95 24
BR-103 Barracuda Trunk lid (ups ok) U,P 119.95 6
BR-103H Barracuda Trunk lid (hinge type; use original slide-in nut plates) (ups ok) U,H 162.95 10
BR-105R&L Barracuda Front fenders Each 199.00   8
BR-106R&L Barracuda Headlight buckets (single headlight style) (ups ok) Each 49.00 2
BR-107 Barracuda upper header panel (in front of hood) (ups ok) U 119.95 2
BR-108 Barracuda lower gravel pan (light holes blanked off) (ups ok) Not for 1971 Barracuda G, U   129.95 5
BR-109 Barracuda rear gravel pan (Has outline for dual exhaust) (ups ok) H, U   129.95 5
BR-110 Fiberglass Barracuda front bumper (Not elastomeric style) U  119.95 2
BR-111 Fiberglass Barracuda rear bumper (UPS OK) (ups ok) U   119.95 10
BR-112R&L Barracuda doors with inner structure and upper window support. Each 239.00 10
BR119R&L Barracuda front bumper brackets (ups ok) Each  35.00 1
BR-200R&L Bond on scoop inserts for R/T hood (ups ok) Each  35.00 1
BR-122 70-74 Hemi-Cuda Hood (SC-102) Hinge Mount H 419.95 18
BR-730 F/E KIT (Includes: BR-101, BR-105R&L, BR-107, BR-108)     770.00 55
BR-732 F/E KIT (Includes: BR-102, BR-105R&L, BR-107, BR-108)     770.00 55
NOTES:


* All Weights are approximate
H- Has small steel inserts for mounting to hinges
P- Pin on only .
U- UPS Okay
L- 71 Cuda has four lights; the 70, 72, 73, 74 have two lights.
G- BR-108 FITS 70, 72, 73 & 74 and DOES NOT FIT 1971 Barracuda

1970-1974 Barracuda "Race Weight" Hoods

BR-101T 70-74 Barracuda Stock flat hood (hinge mount), Race Weight, 4 pins required P 229.00 19.
BR-173T 70-74  3-1/2 Barracuda Cowl hood, Race Weight, 4 pins required P 390.00 22.
BR-175T 70-74  4-3/4 Barracuda Cowl hood, Race Weight, 4 pins required P 390.00 23.
BR-176T 70-74  6 Inch Barracuda Cowl hood, Race Weight, 4 pins required P 390.00 24.
BR-177T 70-74  7 inch Barracuda Cowl Hood, Race Weight, 4 pins required P 410.00 24.
BR-179T 70-74  9 inch Barracuda Cowl Hood, Race Weight, 4 pins required P 450.00 26.
BR-102T Barracuda R/T Hood (with scoop inserts installed, Race Weight, 4 pins required P  249.00 18
BR-125T Barracuda Hood with 5" snorkel, Race Weight, 4 pins required P  299.00 22
BR-127T Barracuda Hood with 7" snorkel, Race Weight, 4 pins required P 299.00 22
BR-122T 70-74 Hemi-Cuda Hood (SC-102), 4 pins required H 389.00 18
BR-144T 1970 -1974 Barracuda hood with six-pack scoop (hinge mount), Race Weight, 4 pins required P 400.00 18.
   

Applications: 1967 Barracuda, 1968 Barracuda, 1969 Barracuda, 1970 Barracuda, 1971 Barracuda, 1972 Barracuda, 1973 Barracuda, 1974 Barracuda

ABOUT | TECH INFO | Q&A  | CATALOG | SHIPPING | CONTACT | HOW to ORDER
index.gif (1853 bytes) GetCatalog.gif (3117 bytes) ShipCharges.gif (2148 bytes) online3.gif (4005 bytes)
LogoH100opt.jpg (1974 bytes)PICTURES AND FURTHER INFORMATION FOR
BARRACUDA 67 - 74
can be viewed by scrolling down or clicking part number above.

BR-100
Designed as a replica of the 69 Cuda flat hood, it has a full inner structure, with full provision to mount to existing hinges. Smooth gel coat surface eliminates the need for extra body work, bondo work or straightening.

BR-105
Designed for street or strip, these durable "glass" fenders come complete with reinforced mounting flanges and will bolt in the original positions. Upper and lower valances will also bolt directly to these fenders in the original places. Extra reinforcement is molded in along the door edge. Not 'gill' type. UP22.com the web's giant site for quality fiberglass. Customers agree, fit, price, quality all come together at UP22.com

BR-167
Ease of installation is a major feature of all Unlimited's fiberglass parts. Our hood has the original raised ridges to accept original style metal louver panels. (Louvers not included). A full inner structure makes this hood rigid but light weight.

BR-106
These headlight housings allow you to install the original headlights. They are replicas of the metal parts and consist of the housing behind the headlight only. You can use the original metal buckets from your old fenders, or install these durable fiberglass buckets directly to our fiberglass fenders.

BR162 Hemi-Cuda version of the 1967 Barracuda and 1968 Barracuda hood. (BR167 hood with SC102 scoop)
Ease of installation is a major feature of all Unlimited's fiberglass parts.



BR162 & BR162T
Newest version of our 67 cuda hood with Hemi-Cuda scoop.
Area in front of scoop has been "smoothed" to eliminate "Ribs"

BR-101
70-74 Cuda standard flat hood has molded edges on all sides to insure a perfect fit without grinding. Full inner structure assures a warp free installation. All Unlimited fiber-glass parts are made with heat resistant resin for maximum durability and to maintain perfect surface straightness.

BR-112L
(BR-112R Not Shown)

Careful design and accurate manufacturing techniques have allowed Unlimited to produce durable racing-style doors. These doors have a full upper frame to allow the racer to attach Lexan windows. These upper frames have been carefully designed and recessed slightly to allow Lexan windows to attach to the outer side of the frames. This method allows the racer to maintain the hard top look by placing the windows in front of the frames*. The upper frames are double wall constructed and will not need any additional bracing. The ends of the doors are laminated triple thick to allow proper attachment of hinges and latches.
LogoH100opt.jpg (1974 bytes)




 

BR-102
This replica of the Cuda R/T hood features added on scoops, to maintain the original look and detail of the small R/T scoops. Full inner structure and easy installation to original hinges are major features of all Unlimited's hoods.

 
BR-173
70-74 Cuda 3-1/2" cowl hood has molded edges on all sides to insure a perfect fit without grinding. Full inner structure assures a warp free installation. All Unlimited fiber-glass parts are made with heat resistant resin for maximum durability and to maintain perfect surface straightness. For race weight order BR173T
BR-175
70-74 Cuda 4-3/4" cowl hood has molded edges on all sides to insure a perfect fit without grinding. Full inner structure assures a warp free installation. All Unlimited fiber-glass parts are made with heat resistant resin for maximum durability and to maintain perfect surface straightness. For race weight order BR-175T

BR-103
Designed for racing application. This trunk lid weighs only 6 lbs. It features minimal inner bracing to insure durability, long life and low weight. Molded edges assure a perfect fit. As with all Unlimited's fiberglass, light sanding to all surfaces is needed to prepare this part for painting.
LogoH100opt.jpg (1974 bytes)

 Toll Free (877) 735-7772

BR-125
Snorkel scoops are still very popular since they allow full "carburetor sealing". This Cuda hood with a 5" snorkel has the snorkel base built into the hood. The snorkel top is supplied along with the hood, and can be easily bolted on to the internal flange. Full inner structure is designed the same as our standard flat hood. This allows for very low weight and high strength. 7" also available.
BR-103H
Street racers and car restorers love the original fit of this product. It will bolt to original hinges and original latch can be installed. The original nut plate from the steel trunk is retained and used with this fiberglass replica. Keeps "original" mounting method.

BR-127
Extra clearance for higher carburetor is designed into this sturdy hood. It features the same strong inner structure as the flat hood. Molded-in steel inserts allow the option of either bolting to hinges or using 4 hood pins. 5" also available.

br144opt.jpg (2941 bytes)BR-144

This hood features the popular 69 Road Runner 6-Pack scoop on a 70-74 Cuda hood. Full open interior allows maximum clearance for your higher carburetor. Designed with a sturdy inner structure for bolting to original hinges. Rolled edges on all sides insure a hassle-free installation. Openings are not cut out to reduce shipping damage to 'center-post' of scoop. Easily cut with jig saw. UP22.com the web's giant site for quality fiberglass. Customers agree, fit, price, quality all come together at UP22.com

BR-110
This fiberglass front bumper can be bolted to original brackets and be painted black or the color of the car. This is NOT the "elastomeric" style bumper that "tucks up" tight to the body. Because all Unlimited's bumpers are manufactured with high quality fiberglass mat and cloth, these bumpers will withstand considerable flexing before they crack or break.
LogoH100opt.jpg (1974 bytes)

Toll Free (877) 735-7772

BR-107
This replica upper valance panel has end flanges for easy mounting to original locations. Full molded flange along the hood line insures durability and perfect fit. Underside front edge has full mounting flange for easy mounting of original grill.

BR-111
This bumper features durable materials and high quality manufacturing. Designed to bolt to original brackets and can be easily painted to match car.

BR-108
Front lower gravel pan features end mounting flanges for easy assembly. Light holes are not cut out to allow for smooth shape and look. Fits 70, 72, 73 & 74 (not 71).

BR-119R/L
To further reduce weight we recommend installing low weight fiberglass bumper brackets. These brackets were designed similar to the original brackets but will only support our fiberglass bumper.

BR-109
This popular rear panel also has original style mounting flanges. Raised areas are molded in for dual exhaust but are not cut out. This allows for use with single exhaust if desired.

BR-200R/L
Small scoop inserts are fiberglass replicas of the original R/T style scoops. Designed to be bonded to our fiberglass hood. Can be bonded to an original steel R/T hood. They are not designed to mount to a flat hood.

br-703.jpg (12742 bytes)BR-703
67-68 Trunk lid. Pin on style. For complete bolt on style order BR-703H
br-710.jpg (1651 bytes)BR-710
Front/Rear bumper for 67 Cuda. Same bumper for front and rear. All fiberglass and be painted black or color matched to your car. Use original brackets or use BR-719 A-F (six pieces).
                     LogoH100opt.jpg (1974 bytes)

        70rtcuda.jpg (12302 bytes)

br-719x.jpg (2263 bytes)BR-719 A-F
Front or rear brackets for 67 Cuda bumper.
Pin down hoods use racing type hood pins to hold down the front. These cannot be converted to a latching style.
You must drill holes in the front area of the hood for the pins, the pins attach to the radiator core support.
These hoods bolt to the original hinges in the rear. Bolts are included. Hood hinge springs must be removed and replaced with our low tension springs or a prop rod.

ABOUT | TECH INFO | Q&A  | CATALOG | SHIPPING | CONTACT | HOW to ORDER
index.gif (1853 bytes) GetCatalog.gif (3117 bytes) ShipCharges.gif (2148 bytes) online3.gif (4005 bytes)
Toll Free Order Line (877) 735-7772 (7:00 to 4:30 Pacific Time)

LogoH250opt.jpg (6243 bytes)

 


Questions about our products, shipping costs, current prices and sales policies can be obtained by calling:
Toll Free (877) 735-7772 or From Canada or other countries - (760) 948-0055
Copyright 2013 Unlimited Products. All rights reserved.
Follow us on FaceBook at "Unlimited Fiberglass"

Copyright 2007 Unlimited Performance Products. All rights reserved. UP22.com, UnlimitedProducts.com, RaceHoods.com